Biological monitoring test /OR SCAN PROVES!

Biological monitoring tests or a forensic hair analysis,
The world-renowned testing facility uses forensic testing of human hair to determine exactly what, if anything, someone has been exposed to — including poison,

chemicals or toxins and heavy metals. Hair lab testing for chemicals, heavy metals and toxic exposures. Also all that is extra in the body will lave behind trace in the body

This test proves nanotechnology inside of the body Very important test.

What is Non-Linear Junction Detector implants scan (NLJD) detects the presence of electronics, regardless of whether they are radiating, hard wired, or even turned off.

Electronics containing semi-conductor properties return a harmonic signature the ORION NLJD can detect when radiated with RF energy. An NLJD detects physical properties,

and not energy emissions. Therefore, devices that contain circuit boards and their component`s, like cell phones, video cameras, and microphones can be detected by the ORION NLJD.

How does a non-linear junction detector work?
The NLJD antenna head is a transceiver (transmitter and receiver) that radiates a digital spread spectrum signal to determine the presence of electronic components.

When the energy encounters semi-conductor junctions (diodes, transistors, circuit board connections, etc.), a harmonic signal returns to the receiver.

The receiver measures the strength of the harmonic signal and distinguishes between 2nd or 3rd harmonics. When a stronger 2nd harmonic is represented on the display in red,

it indicates an electronic junction has been detected. In this way, a hand-held ORION is used to sweep implants objects, containers, furniture, and most types of surfaces

to look for hidden electronics, regardless of whether the electronic device is turned on.
The ORION NLJD can be used alongside other REI equipment to serve investigative applications. Combine the ORION NLJD with our RF Detection, Telephone Inspection,

Audio Security, and Video Inspection equipment for comprehensive technical surveillance countermeasure .They use two equipment and he dose also a frequency scan free with it,

It actually tells you if you have a semiconductor in you.
It detects electronics whether they are on or off. NLJD Is a very Good implants scan test

What is H Scada implants scan test ? they do use five equipment's into H Scada scan, H Scada is a bigger implants scan test then NLJD is and that implant scan test was selected by FCC , also keep in mind that you will have doctor behind you to write your paper for court case. That is very important , so ofcourse H Scada scan test cost more money .
H SCADA PROTOCOL EVALUATION METHOODS AND EQUIPMENT
The evolution and assessment protocols used in the H SCADA methodologies as adapted by IEIA
The equipment used during the evolution and assessment protocols are listed per the appropriate methods as referenced below
Method standard one Emf field meter
Purpose: detection of electromagnetic radiation from the client.
LCD Display of Emf level in milligauss or microTesla { document in microTesla}
Provides accurate measurement to 4% over a measuring range of 0.1 to 199.1 m gauss{ 0.01 to 19.99 Tesla }
ELF Frequency bandwidth of 30 to 300 HZ
Single axis – sampling 2.5 times per second
Method Standard Twoo: RF frequency Detector with Bar Graph
Purpose detection of radio frequency coming to or from client in the specified range .
Frequency range of 1MHz-3GHz
Sensitivity: Less than 5 mV
Microprocessor filtration circuity allowing squelch adjustment to
Diminish RF noise
High sensitivity LCD bar graph
U\
sed both with and without rubber duck antenna during this testing
Method standard there: UHF Bluetooth wireless RFID scanner /Reader/ Writer
Purpose : Detection of RFID chips? Tags in client within specified range reading any code written on any chip /tag code . Detected and optionally rewriting chip/ Tag code.
Frequency Range EU865-868MHz.US902-928mHz
Standards supported :EPC Class 1 Gen 2
Antenna : detachable Circularly polarized with optional 2D scanner
Nominal Read Range up to 13?4m
Nominal write range Up to 4/1/22m
Field 150 Forward facing ( approx.) measured from front of device
Method Standard Four :UV Light Inspection
Purpose Inspection of eyes of client for determining UV fluorescence and nothing color.
UV Light :395nm-405nm
Method standard five: Night vision Scope
Purpose : Detection of bio- glass ‘ infrared glass and?or other nano glass martials for the inspection of infrared reactivity of client.
Image Capture Capability
Infrared intelligence
Method Standard six: metal Detector
Purpose: Detection of subcutaneous metals in client.
Operating : Temperatures-35 F(-37 C ) to 158 F (70 C)
Operating Frequency :95 KHz
Tuning: Automatic
Scan Area:3.5 and 360 plus tip
Ultra-sensitive response to metal object up to 4 depth
Accurate detection of all ferrous; and stainless steel objects
Method standard Seven : Portable Spectrum Analyzer
Purpose: Detection of Radio Frequency coming to or from the client in the specified range for it’ s appropriate setting.
Frequency Range:15_2700MHz
Sensitivity: typ 10pp
Sensitivity Level :typ 3dBm
Resolution F:min. Bandreite?112typ.
Resolution level :0,5 dBm typ.
Setting Accuracy F:1KHz
Bradband Displayed:112 Khz-600 MHz
Antenna jack:2x SMA
Antenna Impedance :500
Display: LCD W/ background light,128x 64 px
Dynamic Range: -115 dBm typ.
Noise Floor:115 DBm typ.
Max Input Levil:=5 dBm
Weight: 185 grams
Dimension w/out antennas: 113 x 70 x 25m
Method standard Eight :Thermal Imaging camera
Purpose: Thermal imaging of client.
True thermal Senor
206x156 Array
32.136 thermal pixels
12ju Pixel pitch
Vanadium oxide microblometer
36 field of view
Magnesium Housing
Long wave infared 7.2 -13 microns
40c to 330c Detection
9HZ

 

Create Your Own Website With Webador